GoodWe GW10K-ET-20
| Typ falownika | Hybrid |
| MPPT | 3 |
| Zasilanie falownika | 10 kW |
| Liczba faz | 3 |
| Typ falownika | Hybrid |
| MPPT | 3 |
| Zasilanie falownika | 10 kW |
| Liczba faz | 3 |
Szczegóły produktu
| Nazwa serii | ET G2 Series |
| Seria Zakres mocy AC (kW) | 6-15 |
| Nazwa modelu | GW10K-ET-20 |
| Maximum DC Power (kW) | 16 |
| Maks. Napięcie DC (V) | 1000 |
| Maks. Prąd stały (A) | 16 |
| Strings per single MPPT | 1 |
| Maksymalna moc AC (kW) | 10 |
| Zakres napięcia wyjściowego AC (V) | 170-290 |
| Nominalne napięcie AC (V) | 400/380 |
| Maksymalny prąd przemienny (A) | 14.5 |
| Częstotliwość (Hz) | 50/60 |
| Współczynnik mocy | 0.8 leading ~ 0.8 lagging |
| Maksymalna wydajność (%) | 98.2 |
| Wydajność w Euro (%) | 97.5 |
| Zakres temperatur pracy (°C) | -35 ~ +60 |
| Klasa ochrony | IP66 |
| Funkcje ochronne | PV Insulation Resistance Detection PV AFC13.0 Residual Current Monitoring PV Reverse Polarity Protection Battery Reverse Polarity Protection Anti-islanding Protection AC Overcurrent Protection AC Short Circuit Protection AC Overvoltage Protection DC Switch DC Surge Protection AC Surge Protection Remote Shutdown |
Opis
The ET G2 hybrid inverter is designed to maximise energy output, enhance self-consumption and facilitate extensive back-up power for homeowners. With power rating up to 15kW, intelligent load controls and a wide battery voltage range, the inverter caters to individual needs. To secure a high level of energy autonomy, combine the hybrid inverter with GoodWe battery Lynx F G2, and connect the system to the GoodWe EV charger HCA and/or any smart-grid ready heat pump. By combining a variety of smart operation modes, the system can be optimized to further drive down energy cost.
Pomiary
| Wysokość (mm) | 460 |
| Szerokość (mm) | 496 |
| Głębokość (mm) | 221 |
