GoodWe GW10K-ET-20
| Tipo de inversor | Hybrid |
| MPPT | 3 |
| Potencia del inversor | 10 kW |
| Número de fases | 3 |
| Tipo de inversor | Hybrid |
| MPPT | 3 |
| Potencia del inversor | 10 kW |
| Número de fases | 3 |
Detalles del producto
| Nombre de la serie | ET G2 Series |
| Serie Rango de potencia CA (kW) | 6-15 |
| Nombre del modelo | GW10K-ET-20 |
| Maximum DC Power (kW) | 16 |
| Máx. Tensión CC (V) | 1000 |
| Máx. Corriente CC (A) | 16 |
| Strings per single MPPT | 1 |
| Potencia máxima de CA (kW) | 10 |
| Rango de tensión alterna de salida (V) | 170-290 |
| Tensión nominal CA (V) | 400/380 |
| Corriente alterna máxima (A) | 14.5 |
| Frecuencia (Hz) | 50/60 |
| Factor de potencia | 0.8 leading ~ 0.8 lagging |
| Máxima eficacia (%) | 98.2 |
| Euro Eficiencia (%) | 97.5 |
| Temperatura de funcionamiento (°C) | -35 ~ +60 |
| Clase de protección | IP66 |
| Funciones de protección | PV Insulation Resistance Detection PV AFC13.0 Residual Current Monitoring PV Reverse Polarity Protection Battery Reverse Polarity Protection Anti-islanding Protection AC Overcurrent Protection AC Short Circuit Protection AC Overvoltage Protection DC Switch DC Surge Protection AC Surge Protection Remote Shutdown |
Descripción
The ET G2 hybrid inverter is designed to maximise energy output, enhance self-consumption and facilitate extensive back-up power for homeowners. With power rating up to 15kW, intelligent load controls and a wide battery voltage range, the inverter caters to individual needs. To secure a high level of energy autonomy, combine the hybrid inverter with GoodWe battery Lynx F G2, and connect the system to the GoodWe EV charger HCA and/or any smart-grid ready heat pump. By combining a variety of smart operation modes, the system can be optimized to further drive down energy cost.
Medidas
| Altura (mm) | 460 |
| Anchura (mm) | 496 |
| Profundidad (mm) | 221 |
