GoodWe GW10K-ET-20
| Wechselrichter Typ | Hybrid |
| MPPT | 3 |
| Wechselrichter Leistung | 10 kW |
| Anzahl der Phasen | 3 |
| Wechselrichter Typ | Hybrid |
| MPPT | 3 |
| Wechselrichter Leistung | 10 kW |
| Anzahl der Phasen | 3 |
Einzelheiten zum Produkt
| Name der Serie | ET G2 Series |
| Serie AC Leistungsbereich (kW) | 6-15 |
| Name des Modells | GW10K-ET-20 |
| Maximum DC Power (kW) | 16 |
| Max. Gleichspannung (V) | 1000 |
| Max. DC-Strom (A) | 16 |
| Strings per single MPPT | 1 |
| Maximale AC-Leistung (kW) | 10 |
| Ausgang AC-Spannungsbereich (V) | 170-290 |
| Nennwechselspannung (V) | 400/380 |
| Maximaler AC-Strom (A) | 14.5 |
| Frequenz (Hz) | 50/60 |
| Leistungsfaktor | 0.8 leading ~ 0.8 lagging |
| Maximaler Wirkungsgrad (%) | 98.2 |
| Euro-Wirkungsgrad (%) | 97.5 |
| Betriebstemperaturbereich (°C) | -35 ~ +60 |
| Schutzklasse | IP66 |
| Schutzfunktionen | PV Insulation Resistance Detection PV AFC13.0 Residual Current Monitoring PV Reverse Polarity Protection Battery Reverse Polarity Protection Anti-islanding Protection AC Overcurrent Protection AC Short Circuit Protection AC Overvoltage Protection DC Switch DC Surge Protection AC Surge Protection Remote Shutdown |
Beschreibung
The ET G2 hybrid inverter is designed to maximise energy output, enhance self-consumption and facilitate extensive back-up power for homeowners. With power rating up to 15kW, intelligent load controls and a wide battery voltage range, the inverter caters to individual needs. To secure a high level of energy autonomy, combine the hybrid inverter with GoodWe battery Lynx F G2, and connect the system to the GoodWe EV charger HCA and/or any smart-grid ready heat pump. By combining a variety of smart operation modes, the system can be optimized to further drive down energy cost.
Messungen
| Höhe (mm) | 460 |
| Breite (mm) | 496 |
| Tiefe (mm) | 221 |
